Genuine SEBO 5289 Filter Tube Seal for X, G, 300/350 & 370 Series Upright Vacuums

Replace a worn, damaged, or missing seal with the Genuine SEBO 5289 Filter Tube Seal. This factory OEM replacement seal is used in the bag housing and internal cover area on a wide range of compatible SEBO upright vacuums.

The 5289 seal helps maintain the proper connection around the filter tube and airflow path. A damaged, deteriorated, or incorrectly installed seal can allow unwanted air leakage and may affect vacuum performance.

Features

• Genuine SEBO OEM replacement part
• Filter tube seal
• Helps maintain a proper airtight connection
• Fits compatible SEBO Automatic X Series uprights
• Fits compatible SEBO Essential G Series uprights
• Fits SEBO Mechanical 300 and 350 models
• Fits compatible SEBO 370 Series commercial uprights
• Factory replacement for a worn, damaged, or missing original seal
• SEBO Part #5289

Compatible SEBO Models

SEBO Part #5289 is used on numerous compatible SEBO upright vacuum cleaners, including models in the following families:

• SEBO Automatic X Series
• SEBO Automatic X1
• SEBO Automatic X2
• SEBO Automatic X4
• SEBO Automatic X4 Boost
• SEBO Automatic X5
• SEBO Automatic X7
• SEBO Automatic X7 Premium
• SEBO Automatic X8
• SEBO Essential G1
• SEBO Essential G2
• SEBO Mechanical 300
• SEBO Mechanical 350
• SEBO Electronic 370
• SEBO 370 Comfort

Please verify your specific vacuum model and part number before ordering.

What Does the Filter Tube Seal Do?

The SEBO 5289 seal is located in the internal bag housing area and provides a seal around the filter tube connection. Maintaining a proper seal in this area helps prevent unwanted air leakage and preserves the vacuum's designed airflow path.

5289 vs. 5842 Seal

There are multiple seals located in this area of many SEBO upright vacuums, so it is important to order the correct one.

• SEBO 5289 - Filter Tube Seal
• SEBO 5842 - Internal Cover to Bag Housing Seal

These are two separate replacement parts. If you are servicing the internal cover or bag housing, inspect both seals for damage, deterioration, or compression before reassembly.

Part Number Information

• Manufacturer: SEBO
• SEBO Part Number: 5289
• Part Type: Filter Tube Seal
• Location: Internal Cover / Dust Bag Housing Area
• Genuine SEBO Replacement Part: Yes

Common Reasons to Replace

• Original seal is cracked or damaged
• Seal has become compressed or deteriorated
• Seal is missing after disassembly
• Air leakage is found around the filter tube connection
• Internal cover or bag housing is being serviced
• Rebuilding or repairing the dust bag housing assembly

Before You Order

Please verify the part you need before ordering. SEBO Part #5289 is the genuine Filter Tube Seal. It should not be confused with the nearby SEBO 5842 internal cover to bag housing seal.

LSV Repair Tip

When servicing the bag housing or internal cover, inspect both the 5289 Filter Tube Seal and 5842 Internal Cover Seal. These seals are located in the same general assembly, and a damaged or improperly seated seal can allow unwanted air leakage.

Before reassembly, make sure the sealing surfaces are clean and that the replacement seal is seated correctly without being twisted, pinched, or folded.

Commonly Inspected Together

• SEBO 5842 Internal Cover to Bag Housing Seal
• SEBO Internal Cover Assembly
• SEBO Dust Bag Housing
• SEBO Filter Safety Catch
• Related bag housing seals and components

Package Includes

• 1 Genuine SEBO 5289 Filter Tube Seal

Why Choose Genuine SEBO Parts?

Genuine SEBO replacement parts are manufactured to the original specifications of compatible SEBO vacuum cleaners. Using the correct OEM filter tube seal helps ensure proper fit and maintain the integrity of the vacuum's airflow system.