Skip Navigation Website Accessibility

Store Hours
Monday-Friday: 9:00-5:30
Saturday: 9:00-4:00
Sunday: CLOSED 

 


Genuine Miele 9160460 SET220 Electric Wand Round Push Button Repair Kit

available at
available at

Low in-store inventory, may be subject to change.

Genuine Miele 9160460 SET220 Electric Wand Round Push Button Repair Kit

The Genuine Miele 9160460 Round Push Button Repair Kit is used to repair the length-adjustment button on the Miele SET220 electric telescopic wand.

Pressing this button unlocks the telescoping mechanism, allowing the wand to be extended or shortened to a comfortable cleaning height. When the button is released, the wand can lock back into the selected position.

This is more than just the visible push button. The repair kit includes the pressure spring, button, casing and retaining clip needed for the button mechanism.

Product Features

  • Genuine Miele replacement part
  • Miele Part #9160460 / 09160460
  • Round push button repair kit
  • Designed for the Miele SET220 electric telescopic wand
  • Unlocks the wand's length-adjustment mechanism
  • Allows the telescopic wand to extend and retract
  • Can repair a damaged wand button without replacing the complete SET220 wand

What's Included?

The Miele 9160460 push button assembly includes:

  • Round push button
  • Pressure spring
  • Button casing
  • Retaining clip / control component

What Does the SET220 Push Button Do?

The Miele SET220 is a length-adjustable electric telescopic wand. The round button releases the wand's locking mechanism so the inner and outer wand sections can slide to adjust the overall length.

If the button becomes broken, worn, stuck or comes apart, the wand may become difficult or impossible to adjust.

Fits the Miele SET220 Electric Telescopic Wand

Part #9160460 is designed for the Miele SET220 direct-connect electric telescopic wand.

The SET220 has been used with numerous Miele canister vacuums equipped with electric powerheads. Parts diagrams show this button used with SET220 wands on models from several Miele families, including select Classic C1 and Complete C3 configurations.

Compatibility should be determined by the wand, not simply by the vacuum model. If your vacuum has a replacement wand or a different wand version, verify that it is a Miele SET220 before ordering.

SET220 vs. SET210

This push button is intended for the SET220 wand and should not be confused with the button used on the older Miele SET210 electric wand.

  • 9160460 / 09160460: Round push button for SET220
  • 5064430 / 05064430: Older adjusting button associated with SET210 applications

Always identify the wand before ordering replacement button components.

Common Reasons for Replacement

  • Round button is broken or missing
  • Button will no longer spring back properly
  • Button has become stuck
  • Wand will not unlock for length adjustment
  • Button mechanism has come apart
  • Spring, casing or retaining component is damaged or missing

Repair the Wand Instead of Replacing It

A damaged adjustment button does not necessarily mean the complete electric wand needs to be replaced. If the SET220 wand itself and its internal locking mechanism are still in good condition, the 9160460 button kit may allow the adjustment mechanism to be repaired.

Important – Inspect the Internal Locking Mechanism

This kit will not repair every SET220 wand adjustment problem.

If internal components of the telescopic locking mechanism are broken, replacing the external button assembly may not correct the problem. Inspect the wand mechanism before ordering if the cause of the failure is uncertain.

LSV Service Tip

If the round adjustment button has popped out of an SET220 wand, don't automatically assume the entire electric wand needs replacement. Check the button, spring, casing and retaining components first.

If those components are damaged but the telescoping and locking mechanism inside the wand is still intact, the Miele 9160460 repair kit may restore normal wand adjustment at considerably less cost than replacing the complete electric wand.

Product Specifications

  • Brand: Miele
  • Part Number: 9160460
  • Full Material Number: 09160460
  • Product Type: Telescopic Wand Push Button Repair Kit
  • Button Shape: Round
  • Wand Compatibility: Miele SET220 Electric Telescopic Wand
  • Function: Releases / unlocks telescopic wand length adjustment
  • EAN: 4002515054536
  • Genuine Miele Part: Yes

Package Includes

  • 1 Round Push Button
  • 1 Pressure Spring
  • 1 Button Casing
  • 1 Retaining Clip / Control Component

Complete SET220 electric wand is not included.