SEBO 5463 Belt 2MR-310-6 for X & G Series Uprights
SEBO 5463 Belt 2MR-310-6 for X & G Series Uprights
The SEBO 5463 Belt 2MR-310-6 is a genuine replacement geared belt for select SEBO Automatic X-Series and Essential G-Series upright vacuum cleaners. This belt is commonly used in the lower power head / brushroll drive system.
SEBO parts references list part 5463 as Belt 2MR-310-6. Dealer listings commonly describe this belt as the motor-to-sensor belt used on compatible SEBO X and G upright models.
This belt is commonly replaced when the original belt is worn, stretched, cracked, slipping, stripped, damaged, or missing. Because SEBO upright vacuums may use more than one internal belt, please verify the belt marking, belt location, and original part number before ordering.
Product Features
- Genuine SEBO replacement belt
- Part number: 5463
- Belt marking: 2MR-310-6
- Geared timing-style belt
- Commonly described as the motor-to-sensor belt
- Fits select SEBO Automatic X-Series and Essential G-Series upright vacuums
- Used in the lower power head / brushroll drive system
- Replacement for worn, cracked, stretched, slipping, stripped, damaged, or missing belts
Compatible Models May Include
- SEBO Automatic X4
- SEBO Automatic X4 Boost
- SEBO Automatic X5
- SEBO Automatic X7
- SEBO Automatic X7 Premium
- SEBO Automatic X8
- SEBO Essential G1
- SEBO Essential G2
- SEBO Essential G4
- SEBO Essential G5
- Select SEBO X-Series upright vacuums using belt 5463 / 2MR-310-6
- Select SEBO G-Series upright vacuums using belt 5463 / 2MR-310-6
Common Reasons for Replacement
- Original belt is cracked, stretched, worn, or damaged
- Belt is slipping or no longer driving properly
- Belt teeth are worn or stripped
- Brushroll drive system is not operating correctly
- Belt was damaged during motor, sensor, brushroll, or lower housing repair
- Performing preventive maintenance on a compatible SEBO upright
- Replacing missing or incorrectly installed internal belt
Product Details
| Brand | SEBO |
| Part Number | 5463 |
| Belt Marking | 2MR-310-6 |
| Item Type | Geared replacement belt |
| Common Belt Location | Motor to sensor |
| Common Fitment | Select SEBO X-Series and G-Series upright vacuums |
| Vacuum Type | Upright vacuum |
| Application | Lower power head / brushroll drive system repair |
| Related Components to Check | Motor pulley, sensor, sensor pulley, belt 219 3M HTDII-6, brushroll, bearing blocks, lower housing, bottom plate, and surrounding drive components |
Fitment Note
Please verify your SEBO model number, production version, belt marking, belt location, pulley style, sensor style, and original part number before ordering. SEBO upright vacuums may use more than one internal belt. This listing is for SEBO 5463, the 2MR-310-6 belt commonly used from the motor to the sensor on select X-Series and G-Series upright models.
Installation Note
Always unplug the vacuum before servicing. Inspect the motor pulley, sensor, sensor pulley, brushroll, bearing blocks, second belt, lower housing, bottom plate, and related drive components before installing a new belt. Do not install a new belt over damaged pulleys, seized bearings, worn bearing blocks, or a jammed brushroll, as this may cause premature belt failure.