Miele SEB228 Connection Socket Neck Assembly Part 7585810 Genuine Powerhead Pivot Neck

Miele SEB228 Connection Socket Neck Assembly – Part #7585810

The genuine Miele SEB228 Connection Socket / Neck Assembly, part 7585810 (also shown as 07585810), is the pivot neck section for the Miele SEB228 powerhead. This part connects the power nozzle to the wand and helps provide the mechanical and electrical connection needed for proper operation. It is commonly replaced when the neck is cracked, the foot release is broken, or when wear or internal damage may be contributing to a loss of power to the powerhead. It is sold by Miele as a “connection socket,” and multiple vacuum-parts retailers describe it as the SEB228 neck or pivot neck assembly.

Common Reasons for Replacement

• Cracked or broken neck assembly
• Broken or worn foot release area
• Loose pivot connection between the wand and powerhead
• Intermittent electrical connection
• Powerhead not turning on due to internal neck/socket failure

Important Diagnosis Information

Always perform proper diagnosis before ordering replacement parts. A powerhead that will not run is not always caused by the neck assembly. The issue could also be related to the wand, hose, canister electrical connection, switch, wiring, or another powerhead component. Replacing parts without diagnosis can lead to unnecessary expense and delay.

Before ordering, inspect for visible cracks, check whether the foot release is physically damaged, and confirm whether the failure is mechanical, electrical, or both. If you are unsure, professional diagnosis is strongly recommended.

Compatibility

This part is specifically referenced for the Miele SEB228 powerhead. Be sure to confirm your exact model and part number before ordering. Retailer listings and Miele’s product page identify this as the SEB228 connection socket / neck assembly. :contentReference[oaicite:1]{index=1}

Product Details

• Brand: Miele
• Part Name: Connection Socket / Neck Assembly
• Part Number: 7585810
• Alternate Format: 07585810
• UPC: 4002514752334
• Application: Miele SEB228 Powerhead

Part number 7585810 / 07585810 and UPC 4002514752334 are shown by sellers carrying this SEB228 connection socket. :contentReference[oaicite:2]{index=2}

Safety and Ordering Notes

• Always disconnect the vacuum from power before inspection or repair.
• Do not order based on appearance alone—verify your exact model and part number.
• Improper installation may damage the powerhead or fail to correct the issue.
• Professional installation or diagnosis is recommended when electrical problems are present.
• Inspect related components for damage before replacing this part.

If your SEB228 powerhead neck is cracked, the release mechanism is broken, or you suspect an internal failure in the pivot/connection area, this genuine Miele replacement part may be the correct solution.