Bissell 2038161 Outer Circular Foam Filter for 68C7 PowerForce Bagless
Bissell 2038161 Outer Circular Foam Filter for 68C7 PowerForce Bagless
The Bissell 2038161 Outer Circular Foam Filter is a replacement pre-motor foam filter designed for select Bissell upright bagless vacuum cleaners, including the 68C7 PowerForce Bagless model. This circular foam filter helps trap dust and debris before air reaches the motor, helping maintain airflow and vacuum performance.
Bissell lists this part as a genuine BISSELL outer circular pre-motor foam filter. It is washable and can be cleaned by hand washing in warm water. A mild detergent may be used if desired. Always allow the filter to air dry completely before reinstalling it in the vacuum.
Product Features
- Genuine Bissell replacement foam filter
- Part number: 2038161
- Also listed as: 203-8161
- Outer circular pre-motor foam filter
- Fits Bissell 68C7 PowerForce Bagless upright vacuums
- Fits select Bissell upright bagless vacuum models
- Washable foam filter
- Helps protect the motor from dust and debris
- Helps maintain proper airflow and suction performance
- Replacement for dirty, clogged, torn, worn, or missing filters
Compatible Models May Include
- Bissell 68C7 PowerForce Bagless
- Bissell 12B1 PowerForce Bagless
- Bissell 1240 PowerForce / PowerGroom / PowerTrak Bagless models
- Bissell 2083 PowerForce / PowerGroom / PowerTrak Bagless models
- Select Bissell upright vacuums using outer circular foam filter part number 2038161
When to Replace or Clean Your Filter
- Vacuum has reduced suction or airflow
- Filter is dirty, clogged, torn, or deteriorated
- Dust escapes or the vacuum smells dirty during use
- Vacuum is being serviced or cleaned
- Filter has not been cleaned or replaced in several months
Product Details
| Brand | Bissell |
| Part Number | 2038161 |
| Alternate Part Number | 203-8161 |
| Item Type | Pre-motor foam filter |
| Filter Shape | Outer circular foam filter |
| Filter Type | Washable foam filter |
| Application | Select Bissell upright bagless vacuums |
| Common Fitment | Bissell 68C7 PowerForce Bagless |
Care Instructions
Clean the foam filter by hand washing it in warm water. A mild detergent may be used if needed. Rinse thoroughly and allow the filter to air dry completely before reinstalling. Do not reinstall the filter while wet.
Replacement Note
Bissell recommends cleaning or replacing filters every 3 to 6 months, depending on use. Keeping an extra filter on hand is helpful so you always have a clean, dry filter ready to install.
Fitment Note
Please verify your Bissell model number and original filter style before ordering. Bissell bagless upright vacuums may use different filters depending on the model and production version. This listing is for Bissell part number 2038161, the outer circular pre-motor foam filter.