Kirby 156294G G3 G4 Wooden Brush Roll with Ball Bearings & Magnet
Kirby 156294G G3 G4 Wooden Brush Roll with Ball Bearings & Magnet
The Kirby 156294G Wooden Brush Roll is a replacement brushroll assembly designed for Kirby Generation 3 and Kirby Generation 4 vacuum cleaners. This brush roll features a durable wooden core, ball bearings for smooth rotation, and a magnet located on the small end for proper compatibility with G3 and G4 models.
The brush roll is one of the most important parts of a Kirby vacuum’s carpet cleaning system. As the brush roll spins, the bristles help loosen dirt, dust, hair, and debris from carpet fibers so the vacuum can lift and capture them through the airflow and filtration system.
Over time, brush roll bristles can wear down, bearings can become noisy, or the brush roll may develop vibration. Replacing a worn brushroll can help restore carpet agitation, improve debris pickup, and keep your Kirby vacuum cleaning properly.
Product Features
- Replacement wooden Kirby brush roll assembly
- OEM part number: 156294G
- Designed for Kirby G3 and G4 vacuum cleaners
- Solid wood brush roll construction
- Ball bearings for smooth brush roll rotation
- Magnet located on the small end of the brushroll
- Factory-style brush pattern for deep carpet cleaning
- Helps restore carpet agitation and debris pickup
- Replacement for worn, noisy, vibrating, or damaged brush rolls
Compatible Kirby Models
- Kirby Generation 3, G3
- Kirby Generation 4, G4
- Select Kirby vacuums requiring brush roll part number 156294G
Common Reasons for Replacement
- Brush roll bristles are worn, uneven, or flattened
- Vacuum is not grooming carpet properly
- Brush roll is noisy or difficult to spin
- Bearings are worn or rough
- Vacuum has excessive vibration from the nozzle area
- Carpet pickup performance has dropped
- Brush roll is damaged or the magnet is missing
Product Details
| Brand Compatibility | Kirby |
| Part Number | 156294G |
| Item Type | Brush roll / brushroll agitator assembly |
| Brush Roll Material | Wood |
| Bearing Type | Ball bearings |
| Magnet Location | Small end of brushroll |
| Common Fitment | Kirby G3 and G4 vacuum cleaners |
| Application | Carpet brush roll agitation system |
Brush Roll Wear Note
Kirby brush rolls are designed with height settings that can help compensate for normal bristle wear. When the bristles become too worn, uneven, noisy, or ineffective, replacing the brush roll can help restore proper carpet cleaning performance.
Fitment Note
Please verify your Kirby vacuum model, original brush roll style, bearing type, and magnet location before ordering. This listing is for Kirby 156294G, a wooden brush roll with ball bearings and a small-end magnet for compatible G3 and G4 vacuum cleaners.
Installation Note
Always unplug the vacuum before servicing. Inspect the belt, belt lifter, brush roll end caps, bearings, nozzle housing, and brush roll chamber while replacing the brushroll. If the new brush roll does not spin freely or the belt wears quickly, check for debris buildup, incorrect belt installation, worn end caps, or restrictions in the nozzle area.
WARNING:This product may contain a chemical known to the State of California to cause cancer, or birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.